Proper care is required to keep your Pop-Up Pit performing optimally, be sure to read all of these instructions carefully to ensure years of use out of your Pop-Up Pit

Campfire regulations are changing rapidly across the United States and in the rest of the world. Federal regulations are moving away from in-ground campfires and cooking due to the mess they leave as well as the irreparable harm they do to the fire pit area. Get ahead of the curve and make sure your fire pit is meeting the regs anywhere adventure might take you.
We get it, space and weight are a premium, thats why we designed the Pop-Up Pit to pack down to the size of a camping chair. Its aerospace inspired design priotizes weight and durablity above all else giving the Pop-Up Pit a final packaged weight of just 7.8 lbs. adding the Ember Mat Ups this total kit weight to just 13lbs.
Buy NowThe Fire Mesh sits at the heart of your Pop-Up Pit. Made from a fire-rated stainless steel alloy, the Fire Mesh is woven tight enough to keep ash contained to your pit while still allowing air to come in from underneath.
This means your fires burn hotter, brighter, and with 80% less smoke.
Buy NowThe Pop-Up Pit prides itself on its simplistic yet rugged design. There are no fasteners or bolts to lose and no tools to fumble with at night.
The Pop-Up Pits patented cross-braced design gives it a weight capacity of 125 lbs and a low center of gravity for stability on windy nights or elevated surfaces.
Your Pop-Up Pit may feel ‘stiff‘ upon first use, this will subside after your first fire.
Your Pop-Up Pit will come wrapped with straps, keep these as they will aidin storage and packing in the future!
If you are having trouble applying the Ember Guards or Fire Mesh WD-40 can be used on the upright poles for lubrication.
Holding the Fire Mesh with the folded edges facing down, each of the four grommets should be placed over the upright poles of the frame. Take care to not let any one corner drop too far down the uprights. Once the uprights are through the grommets slide the Fire Mesh down as one unit until the Fire Mesh is fully seated on top of the Ember Guards.
Proper care is required to keep your Pop-Up Pit performing optimally, be sure to read all of these instructions carefully to ensure years of use out of your Pop-Up Pit
Stainless steel grill grates tolerate intense heat and are rust resistant. It typically only takes a quick brush to keep them clean.
Before packing up and storing your Pop-Up Pit you should ensure that all ash is removed from the Fire Mesh. This should be done by rinsing the mesh after each use. Any excess ash left on the Fire Mesh may degrade the stainless steel over time.
Note: Discoloration is to be expected after use, this is not removable.
Any soot build up can be removed by rinsing with a light detergent. A nylon brush may be use on heavy build-up.
Note: Fires should always be kept at least 1-inch away from your Ember Guards to ensure proper airflow.
Ensure the Heat Shield hangs about even with the ‘X’ brace of the Pop-Up Pit, ~5-6 inches below the heat shield.
Placing the Heat Shield too close to the Fire Mesh will cause damage.
Note: The Heat Shield is fire resistant and not fire proof.
No additional care is needed. WD-40 can be applied to contact points on the frame to ensure smooth opening and closing.